How to change code on Kwikset Smartcode 909? The question generally arises among inexperienced customers who modify their dataset.
Kwikset SmartCode 909 is a famous smart lock assembly. Some people even say they can’t find a better market offer. While it’s quite exaggerated, since for some usage scenarios Kwikset SmartCode 909 isn’t the most optimal choice, Kwikset’s good reputation is indeed earned.
This article covers possible modifications of all kinds of codes available, general info regarding Kwikset SmartCode 909, and the factory reset procedure.
Every bit of Kwikset 909 SmartCode info you’ll need
Kwikset SmartCode 909 is a deadbolt equipped with a SmartKey cylinder. It has a side locking bar. It grips the gear and adjusts itself. The locking bar technology is novel and patented, created to guarantee the mechanism’s safety and protect it from lock bumping. Additionally, there is a strong motor that moves the deadbolt up to unlock the door.
To bypass the lock’s protection, successfully putting a personal code in is mandatory. A physical smart key set isn’t needed. It may seem like it’s less safe than using traditional keys since all you need to enter is to push a few small buttons. But in reality, digital systems are harder to compromise than mechanical locks. Basically, the only way a burglar can get through the security system is if they acquire the passcodes beforehand.
It’s possible to assign temporary codes if you need to let an untrustworthy person in. That way they won’t be able to utilize the password when you don’t want them to. It’s very useful for service workers, distant family, and acquaintances visits.
Installing the Kwikset SmartCode 909 unit isn’t laborious. The procedure only takes 7-12 minutes at worst. Although it’s better to not overestimate that simplicity and pay close attention to your actions during the fitting.
Kwikset company offers a few advantageous features. They aren’t obligatory for an adequate lock experience, but they greatly improve the quality of life. One of them is an illuminated keypad, which allows one to properly see the keys at night. A more important feature is auto-lock, which protects the entrance from being left unlocked. After half a minute, the door will lock itself without any actions required from you.
To alter the dataset, you’ll need to utilize the program button a lot. The program button is placed on the keypad. To dent the program button means pushing/holding it without release. Seldom you’ll hold the program button till the end of the procedure, like with the reset procedure. The same goes for the lock button.
If you purchase the unit officially from Kwikset, you’ll get a 1-year mechanical/finishes warranty.
Prepare — then learn how to change code on Kwikset SmartCode 909
A number of things must be taken into account before starting with the modifications applied to the code dataset.
- Come up with the new code & ensure it’s written down in a safe place. You need to have access to them in case you forget the codes, but they shouldn’t become compromised during any visits to the residence.
- The new access code shouldn’t be the same as the old one, no matter how many times you’ve changed them since they were active.
- Leave time for manipulating the digital lock & prepare the tools. Any more-than-5-second pause times the lockout, forcing you to begin it all over again.
- In case you’ve forgotten the code’s ID, reboot the dataset & codes.
- Always leave the door open when tampering with the lock, or you’ll get yourself locked out.
How to change codes on Kwikset SmartCode 909
The text below covers the question of how to change codes on Kwikset SmartCode 909. That includes all procedures for all kinds of sequences.
About adding user codes & user code ID
Kwikset SmartCode 909 stores up to 8 user codes at the same time. If there are more than 8 user codes, you’ll have to overwrite any outdated codes with a new code to add another user code.
All new user codes possess an ID, so it’s crucial to keep the position in mind in case you want to delete one of them.
Here are the exact steps:
- Leave the door open.
- Pry the deadbolt.
- Apply the ID by pushing the program button accordingly.
- Apply the new user code.
- Dent the lock button once.
You’ll see a green flash & a beep as an indication of your success. Don’t forget to try to get the door open with a new user code — better safe than sorry!
What if you’ve forgotten the access code ID? You’ll have to do a reset and add sequences from scratch. Learn your lesson — when writing down the passwords, also write down their positions.
Enabling master code
Some users are confused about why it’s obligatory to enable the master code if there is already a user code to enter the residence. This requires covering the query of what is a master code exactly and why you might have to use it.
Master code is required for systematical alterations. You can’t modify the lock’s data with no such sequence.
So, here’s how to alter the master code on Kwikset SmartCode 909:
- Physically open the deadbolt.
- Dent the program button for 5 seconds.
- Apply the sequence.
- Push the lock button.
If there is a beep and a green light, the code is set properly. If there are three red blinks, you weren’t successful.
Disabling master code
A procedure exists for eliminating the master code. The only scenario when this option is really valuable is if the code is altered immediately.
Some customers want all residents to tamper with the lock and disable the sequence. It’s not recommended to do that, ever. This way you’ll compromise the system completely. Reprogramming the lock will be possible with any of the active user codes on hand.
Set a new code as soon as possible after deleting the current one.
Here are the instructions:
- Dent the program button for 5 seconds.
- To disable the master code, push the lock button and apply the active sequence.
- To change the existing sequence, apply the active sequence and only then push the lock button.
If the process has ended well, the keypad flashes green and you’ll hear a single beep.
Performing a factory reset
In some cases, usually when dealing with vague malfunctions, a Kwikset SmartCode 909 reset may be required. You may need the reboot procedure if you’ve forgotten some of the sequences’ IDs and now have to wipe the codes.
Bear in mind: the factory reset renders your data obsolete. That includes user settings as well as the user code. You’ll be forced to do the programming from zero.
Before proceeding with the reboot, perform the door handling.
Let’s go back to the original settings:
- Pry the cover plate.
- Remove the batteries.
- Dent the program button, don’t release it yet!
- Place a fresh power pack in the unit.
- Continue denting the program button for half a minute.
- Push the program button again.
A successful reset is indicated by a green Kwikset SmartCode 909 LED and a beep. You should now read the user code.
Final word
Now you know how to change code on Kwikset SmartCode 909. That covers user codes, the master code, and a full reboot.
There is no need for advanced knowledge or wide user experience to add a user code & utilize all of Kwikset’s convenient features. Anyone can do it!